Phone answered 24/7 · Frederick, MD and nearby communities

Call 24/7: (301) 804-1451
Carroll Creek Water ResponseWater Damage Help · Frederick, MD

How Do Restoration Companies Handle Water in a Server Center?

Last updated October 31, 2026

The short answer

Safety First Steps

When water touches a server center, the immediate danger is electrical shock and short circuits. The pros begin by cutting power to the affected area, if that can be done safely. They also identify the water source, whether it is a burst pipe, a leaky roof, or a malfunctioning cooling system. Stopping the flow prevents further damage.

You should never enter a flooded server room yourself. Water and electricity do not mix, and even a small puddle near a rack can be hazardous. The pros use insulated tools and follow strict safety protocols. They may also set up barriers to keep the water from spreading to other parts of the building.

  • Shut off power at the breaker if it is safe to reach
  • Do not touch any equipment or cords standing in water
  • Call a professional water damage service right away
  • Move portable devices away from the wet area if possible
  • Keep people and pets out of the room until it is cleared

Extracting Standing Water

Once the power is off and the source is controlled, the pros remove standing water. They use pumps and wet vacuums designed for commercial spaces, not household tools. The goal is to get the water out quickly to reduce the time it sits on floors and near equipment. Extraction is the first step in drying.

The type of water matters. Clean water from a pipe is different from contaminated water from a sewer or flood. The pros test the water quality to decide on safety measures. If the water is contaminated, they wear protective gear and may need to dispose of porous materials like carpet or drywall.

Drying and Dehumidifying

After extraction, the remaining moisture is hidden in walls, floors, and equipment. The pros place industrial air movers and dehumidifiers around the room. These machines circulate air and pull moisture out of the air. They monitor the drying progress with moisture meters to know when the space is truly dry.

Server centers often have raised floors with cables and wiring underneath. Water can pool in those hidden spaces. The pros lift floor panels and dry the subfloor area thoroughly. They also check ceiling tiles and wall cavities, because moisture can travel upward or sideways. Drying can take several days depending on the extent.

  • Industrial air movers speed up evaporation
  • Dehumidifiers remove moisture from the air
  • Moisture meters track hidden dampness
  • Raised floor areas get special attention
  • Drying time varies with humidity and material

Cleaning and Sanitizing

Standing water often leaves behind dirt, dust, and potential mold spores. The pros clean and sanitize all affected surfaces to prevent microbial growth. They use antimicrobial solutions that are safe for electronics when applied carefully. This step is crucial because mold can start growing within 24 to 48 hours.

For sensitive equipment, the pros may use specialized cleaning methods like vacuuming with HEPA filters or using dry cleaning sponges. They avoid soaking circuit boards unless absolutely necessary. If equipment is damaged beyond repair, they document it for your insurance claim. The goal is to make the space safe for future use.

Documentation and Restoration

The pros document everything they find and do, including photos and notes about damaged equipment. This documentation helps you with your insurance claim. They record the water source, the extent of the damage, and the steps taken. Accurate records make the claim process smoother.

After drying and cleaning, the pros may need to replace damaged materials like drywall, insulation, or flooring. They also test the electrical system to ensure it is safe before power is restored. The final step is a thorough inspection to confirm the area is dry and clean. You can then begin the process of getting your servers back online.

  • Photos of the damage and drying progress
  • Notes on the water source and category
  • Inventory of affected equipment and materials
  • Final inspection before power is restored

Talk to someone now

Water keeps spreading into floors and walls, so it is worth acting early. Calls are answered 24/7.

Call Now (301) 804-1451

Frequently asked questions

Can servers be saved after water damage?

Sometimes, but it depends on the water type and how long they were wet. Clean water from a pipe may cause less damage than contaminated water. The pros can dry and clean some components, but circuit boards may be ruined. Always turn off power and call for help quickly to improve the chances.

How long does drying take in a server center?

Drying typically takes two to five days, but it depends on the amount of water, the materials, and the humidity. The pros use moisture meters to track progress. In a humid climate, drying may take longer. They will not stop until all hidden moisture is removed to prevent mold.

Should I file an insurance claim for server water damage?

You should check your policy and contact your insurer. Policies vary, and your insurer decides what is covered. Water damage from a burst pipe may be covered, but flood damage often is not. Document everything and keep receipts for any repairs. A professional can help with documentation, but coverage is up to your policy.

Call Now (301) 804-1451